Researchers Oğuz Tunçel
avatar
Oğuz Tunçel Asst. Prof. Dr. SİİRT ÜNİVERSİTESİ
Publication 12 Review 14 CrossRef Cited 10 TR Dizin Cited 6
12 Publication
14 Review
10 CrossRef Cited
6 TR Dizin Cited
0000-0002-6886-6367

Research Fields

Resource Technologies Optimization Techniques in Mechanical Engineering Material Design and Behaviors Material Production Technologies Polymers and Plastics

Institution

SİİRT ÜNİVERSİTESİ

Publications

The influence of the raster angle on the dimensional accuracy of FDM-printed PLA, PETG, and ABS tensile specimens
Authors: Oğuz Tunçel
Published: 2024 , European Mechanical Science
DOI: 10.26701/ems.1392387
FAVORITE 0 TOTAL DOWNLOAD COUNT 163

0

163

THE APPLICATION OF THE TAGUCHI METHOD FOR OPTIMIZING THE COMPRESSION STRENGTH OF PLA SAMPLES PRODUCED USING FDM
Authors: Oğuz Tunçel , Mehmet Said Bayraklılar
Published: 2024 , Kahramanmaras Sutcu Imam University Journal of Engineering Sciences
DOI: 10.17780/ksujes.1365534
FAVORITE 0 TOTAL DOWNLOAD COUNT 155

0

155

Optimizing printing parameters for enhanced mechanical properties of 3D printed PLA octet lattice structures
Authors: Oğuz Tunçel
Published: 2023 , European Mechanical Science
DOI: 10.26701/ems.1382590
FAVORITE 0 TOTAL DOWNLOAD COUNT 241

0

241

Elektrik direnç punta kaynağı ile üçlü birleştirilen FEP05/DP600/FEP05 çelik saclarda kaynak parametrelerinin mekanik özelliklere ve mikroyapı üzerindeki etkilerin araştırılması
Authors: Levent Selova , Oğuz Tunçel , Oktay Çavuşoğlu , Çiğdem Dindar , Hakan Aydın
Published: 2023 , Journal of the Faculty of Engineering and Architecture of Gazi University
DOI: 10.17341/gazimmfd.1217239
FAVORITE 0 TOTAL DOWNLOAD COUNT 502

0

502

Investigation of the Effect of Edge Width on Compressive Strength of FCC Structured Specimens Produced with FDM
Authors: Oğuz Tunçel , Mumin Tutar
Published: 2023 , Cukurova University Journal of the Faculty of Engineering
DOI: 10.21605/cukurovaumfd.1377804
FAVORITE 0 TOTAL DOWNLOAD COUNT 148

0

148

Optimization of Nd:YAG Laser Welding Factors of Cold Rolled Strenx 700 CR Steel by Taguchi Method
Authors: Oğuz Tuncel , Hakan Aydın
Published: 2023 , Cukurova University Journal of the Faculty of Engineering
DOI: 10.21605/cukurovaumfd.1273719
FAVORITE 0 TOTAL DOWNLOAD COUNT 286

0

286

Microstructure and mechanical properties of similar and dissimilar laser welds of dp600 and dp1000 steel sheets used in the automotive industry
Authors: Oğuz Tunçel , Hakan Aydın , Şükriye Çetin
Published: 2021 , Turkish Journal of Engineering
DOI: 10.31127/tuje.649975
FAVORITE 0 TOTAL DOWNLOAD COUNT 999

0

999

Effect of Laser Power on Mechanical and Microstructure Properties of Pulsed Nd:YAG Laser Welded Dissimilar DP600-DP1000 Steel Sheets
Authors: Oğuz Tunçel , Hakan Aydın , Şükriye Çetin
Published: 2020 , European Mechanical Science
DOI: 10.26701/ems.632173
FAVORITE 0 TOTAL DOWNLOAD COUNT 406

0

406

Microstructural and Mechanical Properties of Nd:YAG Laser Welded Dissimilar DP600-DP1000 Steel Sheets
Authors: Oğuz Tunçel , Hakan Aydın , Şükriye Çetin
Published: 2020 , Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi
DOI: 10.35414/akufemubid.620768
FAVORITE 0 TOTAL DOWNLOAD COUNT 633

0

633

AA7075 ALÜMİNYUM ALAŞIMINDA ÇÖZME TAVI SICAKLIĞININ YAŞLANMA DAVRANIŞINA ETKİSİ
Authors: Hakan Aydın , Oğuz Tunçel
Published: 2019 , Uludağ University Journal of The Faculty of Engineering
DOI: 10.17482/uumfd.521904
FAVORITE 0 TOTAL DOWNLOAD COUNT 1326

0

1326

The effect of rolling direction and strain rate on the tensile properties of DP450 and DP800 steels used in the automotive industry
Authors: Hakan Aydın , Oğuz Tuncel , Muzaffer Karpuz, Özgür Aydın
Published: 2019 , Journal of Balıkesir University Institute of Science and Technology
DOI: 10.25092/baunfbed.547191
FAVORITE 0 TOTAL DOWNLOAD COUNT 2386

0

2386

The Effect of Rolling Direction and Strain Rate on the Tensile Properties of AA6082-T6 and AA1035-H14 Aluminum Alloys
Authors: Hakan Aydın , Oğuz Tunçel , Kurtuluş Yiğit , Furkan Balamur, Oktay Çavuşoğlu, Oğuzalp Düzgün
Published: 2017 , Uludağ University Journal of The Faculty of Engineering
DOI: 10.17482/uumfd.297265
FAVORITE 0 TOTAL DOWNLOAD COUNT 7467

0

7467

Articles published in
Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi
Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi
Cukurova University Journal of the Faculty of Engineering
Cukurova University Journal of the Faculty of Engineering
European Mechanical Science
European Mechanical Science
Journal of Balıkesir University Institute of Science and Technology
Journal of Balıkesir University Institute of Science and Technology
Journal of the Faculty of Engineering and Architecture of Gazi University
Journal of the Faculty of Engineering and Architecture of Gazi University
Kahramanmaras Sutcu Imam University Journal of Engineering Sciences
Kahramanmaras Sutcu Imam University Journal of Engineering Sciences
Turkish Journal of Engineering
Turkish Journal of Engineering
Uludağ University Journal of The Faculty of Engineering
Uludağ University Journal of The Faculty of Engineering

Reviews

Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
European Mechanical Science
European Mechanical Science
Journal of the Faculty of Engineering and Architecture of Gazi University
Journal of the Faculty of Engineering and Architecture of Gazi University
Kahramanmaras Sutcu Imam University Journal of Engineering Sciences
Kahramanmaras Sutcu Imam University Journal of Engineering Sciences
Turkish Journal of Applied Sciences and Technology
Turkish Journal of Applied Sciences and Technology
Turkish Journal of Engineering
Turkish Journal of Engineering
Uludağ University Journal of The Faculty of Engineering
Uludağ University Journal of The Faculty of Engineering

Publications

The influence of the raster angle on the dimensional accuracy of FDM-printed PLA, PETG, and ABS tensile specimens
Authors: Oğuz Tunçel
Published: 2024 , European Mechanical Science
DOI: 10.26701/ems.1392387
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 163

1

0

163

Optimizing printing parameters for enhanced mechanical properties of 3D printed PLA octet lattice structures
Authors: Oğuz Tunçel
Published: 2023 , European Mechanical Science
DOI: 10.26701/ems.1382590
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 241

1

0

241

Optimization of Nd:YAG Laser Welding Factors of Cold Rolled Strenx 700 CR Steel by Taguchi Method
Authors: Oğuz Tuncel , Hakan Aydın
Published: 2023 , Cukurova University Journal of the Faculty of Engineering
DOI: 10.21605/cukurovaumfd.1273719
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 286

1

0

286

Microstructure and mechanical properties of similar and dissimilar laser welds of dp600 and dp1000 steel sheets used in the automotive industry
Authors: Oğuz Tunçel , Hakan Aydın , Şükriye Çetin
Published: 2021 , Turkish Journal of Engineering
DOI: 10.31127/tuje.649975
CITED 3 FAVORITE 0 TOTAL DOWNLOAD COUNT 999

3

0

999

Effect of Laser Power on Mechanical and Microstructure Properties of Pulsed Nd:YAG Laser Welded Dissimilar DP600-DP1000 Steel Sheets
Authors: Oğuz Tunçel , Hakan Aydın , Şükriye Çetin
Published: 2020 , European Mechanical Science
DOI: 10.26701/ems.632173
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 406

1

0

406

Microstructural and Mechanical Properties of Nd:YAG Laser Welded Dissimilar DP600-DP1000 Steel Sheets
Authors: Oğuz Tunçel , Hakan Aydın , Şükriye Çetin
Published: 2020 , Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi
DOI: 10.35414/akufemubid.620768
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 633

1

0

633

AA7075 ALÜMİNYUM ALAŞIMINDA ÇÖZME TAVI SICAKLIĞININ YAŞLANMA DAVRANIŞINA ETKİSİ
Authors: Hakan Aydın , Oğuz Tunçel
Published: 2019 , Uludağ University Journal of The Faculty of Engineering
DOI: 10.17482/uumfd.521904
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 1326

1

0

1326

The Effect of Rolling Direction and Strain Rate on the Tensile Properties of AA6082-T6 and AA1035-H14 Aluminum Alloys
Authors: Hakan Aydın , Oğuz Tunçel , Kurtuluş Yiğit , Furkan Balamur, Oktay Çavuşoğlu, Oğuzalp Düzgün
Published: 2017 , Uludağ University Journal of The Faculty of Engineering
DOI: 10.17482/uumfd.297265
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 7467

1

0

7467

Popular Publications: It is determined automatically by the researchers doing research in DergiPark according to the statistics of being added to the favorites. CrossRef Cited: The citations shown in DergiPark are drawn from CrossRef. For this, the cited and cited articles must be registered in CrossRef (DOI number). ^: Citation numbers are reflected in the system by DergiPark at certain periods. : Click to get information about the DergiPark User Badge.
Interactive Guide Tool
If you want to see the panel introduction, you can click Start Tour.